Veneer Dryer Feeder-manufacture,factory,supplier from China

The demand for wood veneer dryer is increasing year by year,and it has been recognized and purchased by consumers.Traditional natural air-dried wood is prone to problems such as deformation and cracking.The use of wood dryer equipment can effectively solve this problem.The cost of dryer equipment is high, so basic maintenance needs to be done in the later use process,such as the ground,ventilation system, gate,instrument,heating system and debugging system,etc.The specific operations are as follows:1.The floor of the wood dryer equipment should be kept clean and tidy,and the debris should be c

The shipment of veneer roller dryer were loaded into six trucks at our factory. Main components are: Four layers roller dryer, biomass burner, automatic veneer feeder and veneer collection system. 

Faults of the board dryer are as follows: 1. Failure analysis of rotary granulator: the main engine current is unstable. Production reasons: uneven feed, main motor bearing damage or poor lubrication, no heating. Faulty heater or incorrect phase, incorrect screw adjusting pad, component interference. Treatment method: Troubleshooting, check the feeder, replace the bearing if necessary. Repair the main motor and replace the heater if necessary. Check whether each heater is working properly, pull out the screws to check the interference of the screws, and check the adjustment pad. 2.

The production of our 4 deck veneer dryer purchased by our customer in Guizhou has now been completed and will be ready to be sent to the customer.The supporting biomass burner can directly burn all kinds of waste wood.and our veneer dryer adopts automatic electric control and frequency conversion system,which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect.Equipped with automatic veneer feeder and automatic collection system,which not only improves the drying efficiency but also sav

The 3rd biomass veneer roller dryer 4 deck with autmatic feeder, veneer collection machine, is heated with a 15ton biomass burner. The customer already purchased 2 sets Shine biomass veneer roller dryer machines and this is the third 4deck roller dryer. The wood core veneer drying machine help the customer make more money in the past years and we believe the third set automatic veneer dryer will dry a satisfying veneer quantity at a very low veneer drying cost.     

Recently, a brand new veneer dryer from our company is being sent to the customer's factory. After many inspections, the customer finally chose us. We specially customize the production according to the customer's veneer size to ensure that the output of the veneer dryer meets the customer's production needs. It can be used to dry various wood species.

A roller veneer dryer purchased by our Philippine customer has been completed and is being shipped recently. This equipment will provide customers with a more efficient and stable veneer drying solution to help them improve their production capacity and product quality.The heat exchanger of the veneer dryer adopts step-by-step heat exchange. The specifications of the heat exchanger in each section are different, and the hot air in the heat exchanger can be evenly distributed to the veneer. It can ensure that the veneer is evenly heated during the drying process.

We are pleased to announce that the double-layer veneer dryer recently customized for a Thai customer has been completed and is being prepared for shipment.

A veneer drying equipment ordered by a Thai customer has been installed and tested. It is equipped with a biomass burner, which can directly burn the bark to save fuel costs. Our professional engineers went to the customer's factory to guide the installation and trained the factory workers to operate it skillfully. It is used to dry rubber wood.Using new upgraded technology, compared with traditional veneer dryers, it has better drying effect, flat and wrinkle-free, simple operation, stable equipment, low failure rate, and effectively improves the output of the roller dryer.

Xishuangbanna clients to buy 58 meters 4.5 meters wide double roller veneer dryer,heat conduction oil heating,high yield,uniform drying the moisture content of veneer,the customer has now been put into use,satisfied with our equipment,our equipment sure got a lot of customers at home and abroad,we must strive to do better,Welcome customers to visit our factory at any time.