How does the veneer dryer work

Wood veneer needs to be dried before use, so that the wood is not prone to problems in future use, and the dried sheet is easier to save. Here's a look at how the dryer works.

Wood veneer into the dryer before, after treatment, divided into the same thickness of the plate, into the mechanical interior, heating evaporation, the use of high temperature rapid drying construction technology, the treated plate is not easy to crack, deformation, the process should consider temperature, humidity, time and other issues, each has strict regulations, more than the index will affect the quality of the plate.

In the process of using the dryer, we should avoid paying attention to electricity, avoid circuit problems, dangers or plate problems, affecting the use of, in the normal working process, there are many problems to pay attention to, especially the control of temperature and humidity, otherwise it will directly affect the quality of the plate.

The first stage is to raise the temperature of the plate by heating to the evaporation of water in the wood, the water in the wood evaporates into the air, and then the dryer evaporates water through the heat; The second stage is heating, because the veneer has just come into contact with the heat generated by the machine, the temperature can not reach the purpose of drying, so it needs to be heated in order to quickly evaporate the water in the wood; The third stage is to lower the temperature. When the temperature of the wood veneer reaches a certain level, the evaporation rate of water in the veneer will be reduced, because most of the water in the wood has not evaporated, and the remaining heat is enough to remove the remaining water in the wood.

Veneer dryer in the use of the process, there may be failure, mainly due to wear caused by the need to replace the new; Dryer in the long-term use of the process will lead to loose and broken belts, this problem is easy to solve, we need to check often, need to be replaced in time.

If the dryer catches fire during use, this situation is usually caused by improper operation, so it is necessary to master the corresponding operating rules before using the dryer; The equipment will produce a lot of noise after a period of time, which is normal, and many aspects need to be considered, such as whether the placement is correct, whether the installation process is correct, whether the parts are short of oil or serious wear, and timely treatment and solution.