The four deck veneer dryer purchased by myanmar factory is used to dry rubber wood. The customer gives good feedback. It is used with the biomass burner.The biomass burner which as the heat source can provide high temperature to the dryer to make sure the sufficient heat impinged on the wet veneer…
2022/04/13 10:25
Shine 4deck veneer dryer is our newly developed product to meet high capacity requirements of customers, which has the salient features of higher drying capacity. The rollers use φ102 seamless steel pipe. The bearings of 4 deck veneer dryer are featured high temperature 500 degree Celsius…
2022/04/07 14:44
Choose the regular veneer dryer manufacturer's equipment, in order to ensure the quality of wood after drying. Choose a good drying equipment, from the performance of equipment, market, price, after-sales service and other aspects of comprehensive consideration.1, to understand the performance of…
2022/03/29 09:50
First, the heating speed is fast. Microwave heating of veneer dryer is completely different from traditional heating. This is the process by which the heated material itself becomes a heater with no heat conduction. Therefore, although it is a material with poor thermal conductivity, it can also…
2022/03/22 09:50
The 36-meter double-layer veneer dryer purchased by xishuangbanna customers has been installed and successfully run. In addition, a drying room is added. It uses biomass burner to burn waste wood for heating, which greatly saves the drying cost and produces uniform moisture content of veneer.
2022/03/15 10:21
Because the single board dryer is a long and large equipment, it is necessary to install the single board dryer in a correct sequence and method. The correct installation process is as follows:1. Draw the base line: make the cross line and elevation line correctly on the base plate. The burying of…
2022/03/08 09:30
Indonesia customers buy 40 m double veneer dryer is now the installation is complete, is in debugging, because of the outbreak reason we can't send people to guide the installation, the customer installed successfully in our video and chat to communicate guidance, thank you very much for our…
2022/03/03 14:33
Wood veneer needs to be dried before it is used, so that wood is not prone to problems in the future use, and the plate after drying is easier to save. Here's how the veneer dryer works.Wood veneer before entering the dryer, after processing, can be divided into the same thickness of the plate,…
2022/02/28 10:22
The 38-meter four-layer veneer dryer purchased by Guangdong customers has been successfully installed and run. It uses biomass burner to burn waste wood for heating and has the function of automatic stacking, which greatly saves labor costs.
2022/02/23 09:56
The wood veneer dryer needs to pay attention to some problems when drying wood. Before use, it should start the heating fan and start the speed regulating motor when reaching the drying temperature. The veneer should be entered longitudinally from the feed port, the feed should be straightened, the…
2022/02/14 13:36
The roller veneer dryer purchased by the Russian customer has been delivered, together with our biomass burner. Biomass burner is our patented product, which can directly burn waste wood and save cost.
2022/02/09 10:11
Q: What is the delivery time?A: Normally will be 30 days after getting deposit or original LC.
2021/12/29 14:39