< >

Biomass Veneer Drying Line Machine

Shine heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.

Contact Now

Product Details

Biomass Veneer Drying Line Machine

4 deck veneer dryer is our newly developed product to meet high capacity requirements of customers, which has the salient features of higher drying capacity. The rollers use φ102 steel special shaft tube. The bearings of 4 deck veneer dryer are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance which no need injecting oil and easy maintenance in the daily operation.A unique heat exchange structure makes the equipment run efficiently and greatly improves drying output. Biomass burner is our patented product, which can burn waste wood (rotary cutting veneer, waste bark, and waste veneer) directly, heat air, and deliver to the dryer directly without heat loss. The fuel cost is much lower than thermal oil, steam gas, electricity, and others.

veneer dryer

Advantages of Veneer Dryer Machine

1. The biomass burner, a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, which is energy-saving and environmentally friendly, and greatly reduces the drying cost.

2. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste. It has obtained the national invention patent.

3. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.

4. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.

5. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.

6. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.

7. We have a professional R&D team which can design different models according to customer’s special requirement.

8. The perfect after-sale service team can supply 24 hours online service.

Parameter Model	DHS20M	DHS22M	DHS24M	DHS26M	DHS28M	DHS30M
Work width（m）	3	3	3	3	3	3
Deck	4	4	4	4	4	4
Veneer thickness（mm）	0.6-8	0.6-8	0.6-8	0.6-8	0.6-8	0.6-8
Heating area （m）	16	18	20	22	24	26
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	About 3	About 3.3	About 3.6	About 4	About 4.4	About 4.8
Heat exhaustion（10000 kcal/h）	About 105	About115	About126	About140	About 154	About168
Total power (kw) about	105	110	115	120	125	130
Overall size LxW（m）	31*5.5	33*5.5	35*5.5	37*5.5	39*5.5	41.*5.5

Customer Case

Customer Case

Exhibitions and Customer Visits

Exhibition

Customer visit pictures

Send your message to us

Related Products

Shine Machinery is a large manufacturer specializing in the development of wood veneer dryer and veneer sheet peeling equipment. Provide one-stop veneer production solutions with rich experience, technological innovation and after-sales guarantee.